RDHC-150P
PRODUCT OPERATION
-5-
TIMER
c
TOTAL TIME
1. Dehumidify Indicator
2. Water Pump Indicator
3. Defrost Indicator
4. FAN Indicator
5. Accumulated Run Time
6. Timer button
7. Drain Button
8. Up and Down Button
9. On/Off Button
NOTE:
ALWAYS unplug the unit, properly wrap the power cord and utilize the plug storage receptacle before moving or servicing. Use only the ON/ OFF button to turn the
unit on and off.
This dehumidifier is equipped with Automatic Purge Pump Feature.
Press Drain button to have the pump automatically empty the water inside the dehumidifier.
Press to adjust the humiditiy setting.
Plug the power cord into a standard electrical power outlet. The control panel will illuminate, all indicators will appear briefly before reverting to a grey screen.
Press the “ON/OFF” button to turn the unit on.
OPERATING TIPS
NOTE:
1. When the humidity setting is higher than the current room humidity, the compressor will not run and fan motor continues running. Maintaining the humidity
between 45-65% is suggested for best results.
NOTE:
NEVER attempt to start, stop and restart the unit without waiting at least
3 minutes
. Failure to do so may cause damage to the compressor and/ or
cause unit failure.
2. The unit will automatically sense when it needs to enter the DEFROST cycle, especially in low-temperature environments. During the defrost cycle, the DEFROST
Indicator will illuminate on the display, the compressor will turn off, and the fan motor will run until the cycle is complete. The built in auto pump will automatically
remove water
3. Accumulated run time on the display indicates the total number of hours that the unit has been operated.
NOTE:
ALWAYS unplug the unit, properly wrap the power cord and utilize the plug storage receptacle before moving or servicing. Use only the ON/OFF
button to turn the unit on and off.
Press “TIMER” button to set time to shut off or start on. When the dehumidifier is plugged-in and in stand-by mode, use the TIMER feature to automatically turn
the dehumidifier ON. When the dehumidifier is operating, use the TIMER feature to automatically turn the dehumidifier OFF. To use TIMER function, press the
TIMER button and press the +/- buttons to adjust the time from 0-24 hours followed by pressing the TIMER button.
TIMER
10. Humidity %
11. Temperature °C
