background image

ROYAL PRESTIGE

®

  

JUICER

18

How to Clean Silicone Parts

SILICONE BRUSHES

Pull out the Silicone brushes from the rotation wiper to clean.
After cleaning, insert into the slot with the tail pointing down as 
shown in the illustration.

SILICONE RING

Remove the silicone ring from the strainer to clean. 
After cleaning, push in the silicone ring with the smaller surface 
facing down.

Clean the Rotation Wiper under running water. Thoroughly dry after cleaning. 

Tip:

21

20

HOW TO USE THE CLEANING TOOL

Hold the cleaning tool with one hand and insert 

the strainer into the cleaning tool.

HOW TO CLEAN SILICONE PARTS

Silicone Brush

Pull out the silicone brush from 

the rotation wiper to clean. 

After cleaning, insert into the slot 

with the tail pointing down as 

shown in the illustration.

Silicone Ring

Remove the silicone ring from 

strainer to clean. 

After cleaning, push in the silicone 

ring.

Smart Cap

Remove from the juice spout  

to clean. 

After cleaning, attach the smart 

cap to the smart cap silicone on 

the juice spout.

Clean the rotation wiper under running water. 

Thoroughly dry after cleaning. Before assembling the top-set, ensure that the silicone ring is 

firmly inserted.

If the silicone ring is not firmly inserted, juice may leak from the bottom of the juicing bowl.

Tip      |

Note  |

The cleaning tool makes clean-up quick and easy.  

Completely dry after cleaning.

Tip      |

1

After cleaning, remove the strainer from the 

cleaning tool. Dry before storing.

4

Under running water, rotate the cleaning tool 

and the strainer in opposite directions to clean.

2

Thoroughly rinse the inside and outside of 

the strainer under running water.

3

Note   |

Insert the strainer until you hear a click.

* The products illustrated in this booklet may vary slightly from the actual product. 

Cleaning inside of the bowl

Please unscrew the cover on the bottom and clean inside. 
After cleaning, make sure that protrusion part of gear is 

placed on the outer part so it fits (connects) with the drum.
Sequence of assembly is in reverse order of disassembly.

CAP

Remove from the juice spout to clean. 
After cleaning, insert the silicone piece into the cap and attach 
the cap into the juice spout.

Summary of Contents for JU0024

























Reviews: