ROYAL PRESTIGE
®
JUICER
15
NOTE:
Extract all the remaining pulp in the bowl before stopping the Juicer .
For easier clean up, operate the Juicer for an additional 30 seconds after the juice
is extracted.
When the feed tube is stuck, press the REVERSE – OFF – FORWARD button in this order, switching back
and forth 2 to 3 times to dislodge Then place hands on the lower part of the feed tube and firmly press down
simultaneously turning the feed tube counter clockwise to open
NOTE:
When moving the appliance, do not lift
by grabbing the feed tube. Always lift the
appliance by grabbing the base or handle.
Switch OFF and unplug the power cord from
the wall outlet.
1
Turn the feed tube counter clockwise to open.
2
19
18
HOW TO DISASSEMBLE AND CLEAN
Tip |
Clean the body with a soft damp towel
and dry.
Note |
Tip |
Note |
Under running water, clean the outside
of the juicing screw with a dish scrub. Use
the tip of the cleaning brush to push out
any residue in the crevices on the bottom
of the juicing screw.
With the smart cap closed, fill the juicing
bowl with water and turn on the juicer.
Let it run for a moment. Open the
smart cap and let the water run out of
the juicing bowl.
Turn the drum lid counter clockwise to
open.
Note |
Note |
Switch OFF and unplug the power cord
from the wall outlet.
11
6
7
2
Turn the top-set counter clockwise and
lift off the body.
3
1
2
Quick Rinsing
Note |
TIP |
Remove the juicing screw, strainer and
rotation wiper unit from the juicing bowl.
Clean with provided brush.
Place the juicing bowl under running
water.
4
5
* The products illustrated in this booklet may vary slightly from the actual product.
Extract all the remaining pulp in the
juicing bowl before stopping the juicer.
For easier clean up, operate the juicer for
an additional 30 seconds after the juice is
extracted.
When the drum lid is stuck, press the
REVERSE – OFF – FORWARD button in this
order, switching back and forth 2 to 3 times
to dislodge. Then place both hands on
the drum lid and firmly press down while
simultaneously turning the drum lid to open.
* Fill the juicing bowl with water and run
the juicer before opening the drum lid. It
may help to open the drum lid when stuck.
·
·
·
When moving the appliance, do not lift
by grabbing the feeding tube. Always lift
the appliance by grabbing the body or
handle.
Immediately clean the juicer after each
use. If remaining residue in the juicer dries
up, it can make disassembling and clean-
up difficult. The excess build up can cause
poor performance in future uses.
For easier disassembly, place the top-
set in the sink and run the water through
from the top of the top-set.
Thoroughly dry the bottom of the juicing
screw.
The round brush can clean the juice
spout of the juicing bowl.
After juicing ingredients with seeds, make
sure to thoroughly clean the bottom
crevice of the juicing screw. (If this area
isn’t properly cleaned, it can cause the
part to be damaged.)
Thoroughly clean the juicing screw
ensuring that the juicing screw is clean
without any residue.
Completely dry before using.
If the towel is dripping wet, make sure
to squeeze out the excess liquid before
using it on the juicer.
It is not necessary to completely clean
the juicer in between making multiple
juices during a single juicing session.
When finished with juicing, always
disassemble and clean thoroughly
between juicing sessions to prevent
residue buildup.
19
18
HOW TO DISASSEMBLE AND CLEAN
Tip |
Clean the body with a soft damp towel
and dry.
Note |
Tip |
Note |
Under running water, clean the outside
of the juicing screw with a dish scrub. Use
the tip of the cleaning brush to push out
any residue in the crevices on the bottom
of the juicing screw.
With the smart cap closed, fill the juicing
bowl with water and turn on the juicer.
Let it run for a moment. Open the
smart cap and let the water run out of
the juicing bowl.
Turn the drum lid counter clockwise to
open.
Note |
Note |
Switch OFF and unplug the power cord
from the wall outlet.
11
6
7
2
Turn the top-set counter clockwise and
lift off the body.
3
1
2
Quick Rinsing
Note |
TIP |
Remove the juicing screw, strainer and
rotation wiper unit from the juicing bowl.
Clean with provided brush.
Place the juicing bowl under running
water.
4
5
* The products illustrated in this booklet may vary slightly from the actual product.
Extract all the remaining pulp in the
juicing bowl before stopping the juicer.
For easier clean up, operate the juicer for
an additional 30 seconds after the juice is
extracted.
When the drum lid is stuck, press the
REVERSE – OFF – FORWARD button in this
order, switching back and forth 2 to 3 times
to dislodge. Then place both hands on
the drum lid and firmly press down while
simultaneously turning the drum lid to open.
* Fill the juicing bowl with water and run
the juicer before opening the drum lid. It
may help to open the drum lid when stuck.
·
·
·
When moving the appliance, do not lift
by grabbing the feeding tube. Always lift
the appliance by grabbing the body or
handle.
Immediately clean the juicer after each
use. If remaining residue in the juicer dries
up, it can make disassembling and clean-
up difficult. The excess build up can cause
poor performance in future uses.
For easier disassembly, place the top-
set in the sink and run the water through
from the top of the top-set.
Thoroughly dry the bottom of the juicing
screw.
The round brush can clean the juice
spout of the juicing bowl.
After juicing ingredients with seeds, make
sure to thoroughly clean the bottom
crevice of the juicing screw. (If this area
isn’t properly cleaned, it can cause the
part to be damaged.)
Thoroughly clean the juicing screw
ensuring that the juicing screw is clean
without any residue.
Completely dry before using.
If the towel is dripping wet, make sure
to squeeze out the excess liquid before
using it on the juicer.
It is not necessary to completely clean
the juicer in between making multiple
juices during a single juicing session.
When finished with juicing, always
disassemble and clean thoroughly
between juicing sessions to prevent
residue buildup.
19
18
HOW TO DISASSEMBLE AND CLEAN
Tip |
Clean the body with a soft damp towel
and dry.
Note |
Tip |
Note |
Under running water, clean the outside
of the juicing screw with a dish scrub. Use
the tip of the cleaning brush to push out
any residue in the crevices on the bottom
of the juicing screw.
With the smart cap closed, fill the juicing
bowl with water and turn on the juicer.
Let it run for a moment. Open the
smart cap and let the water run out of
the juicing bowl.
Turn the drum lid counter clockwise to
open.
Note |
Note |
Switch OFF and unplug the power cord
from the wall outlet.
11
6
7
2
Turn the top-set counter clockwise and
lift off the body.
3
1
2
Quick Rinsing
Note |
TIP |
Remove the juicing screw, strainer and
rotation wiper unit from the juicing bowl.
Clean with provided brush.
Place the juicing bowl under running
water.
4
5
* The products illustrated in this booklet may vary slightly from the actual product.
Extract all the remaining pulp in the
juicing bowl before stopping the juicer.
For easier clean up, operate the juicer for
an additional 30 seconds after the juice is
extracted.
When the drum lid is stuck, press the
REVERSE – OFF – FORWARD button in this
order, switching back and forth 2 to 3 times
to dislodge. Then place both hands on
the drum lid and firmly press down while
simultaneously turning the drum lid to open.
* Fill the juicing bowl with water and run
the juicer before opening the drum lid. It
may help to open the drum lid when stuck.
·
·
·
When moving the appliance, do not lift
by grabbing the feeding tube. Always lift
the appliance by grabbing the body or
handle.
Immediately clean the juicer after each
use. If remaining residue in the juicer dries
up, it can make disassembling and clean-
up difficult. The excess build up can cause
poor performance in future uses.
For easier disassembly, place the top-
set in the sink and run the water through
from the top of the top-set.
Thoroughly dry the bottom of the juicing
screw.
The round brush can clean the juice
spout of the juicing bowl.
After juicing ingredients with seeds, make
sure to thoroughly clean the bottom
crevice of the juicing screw. (If this area
isn’t properly cleaned, it can cause the
part to be damaged.)
Thoroughly clean the juicing screw
ensuring that the juicing screw is clean
without any residue.
Completely dry before using.
If the towel is dripping wet, make sure
to squeeze out the excess liquid before
using it on the juicer.
It is not necessary to completely clean
the juicer in between making multiple
juices during a single juicing session.
When finished with juicing, always
disassemble and clean thoroughly
between juicing sessions to prevent
residue buildup.
Lift top set vertically off base.
3
Remove the juicing screw, strainer and rotation wiper unit
from the bowl. Clean with provided brush.
4
Cleaning and Care
