14
•
•
Step 25
–
Raise Part “15” (Charcoal Pan) to its
highest position using Part “17” (Adjustable
Handle). NOTE: Always perform this step
before removing or installing Part “10” (Ash Pan).
Slide Ash Pan into the opening at the bottom of
the grill.
See figure 12.3
Figure 12.3
Step 26
–
Attach Part “19” (Hood Handle) to
Part “18” (Stainless Steel Roll Top Hood) using the
screws (included with handle) and two Part “M”
(Insulating Washers). The washers go between the
hood handle and the outside of the hood.
See figure 12.4
Step 27
–
Install Part “18” (Stainless Steel Roll
Top Hood) making sure that the TOP FLANGE of
the hood is inside the body of the grill when the hood
is closed. Insert one Part “K” screw to align holes.
Hold the screw in place while opening the hood and
attach one Part “L” nut. Repeat steps for other side.
See figure 12.5
Figure 12.5
Figure 12.4
