11
•
•
•
Step 16
–
Locate Part “16” (Adjustable
Assembly)
Realign the right hand components
so that it mirrors the left-side assembly.
See figure 10.1
Step 17
–
Place Part “15” (Charcoal Pan) inside
the TABS of Part “16” (Adjustable Assembly) and
then align
SPINDLE holes over TAB holes. Attach
TABS and SPINDLES of Part “16” to Part “15”
using two Part “B” screws and two Part “F” nuts.
NOTE: Part “15” should be placed so that the pan
acts as a “basket” or “bowl”.
See figure 10.2
Figure 10.2
Spindle
Tab
Step 18
–
Insert the assembled adjustable
charcoal pan (Parts “15 & 16”) into the grill body.
(
NOTE: The handle rod should penetrate the grill
body via the hole on the right side.
)
Attach charcoal pan brackets to grill body using
four Part “B” screws and four Part “F” nuts.
Screws should be installed from the outside of
grill body, with nuts positioned inside the grill
body.
Finger tighten until all 4 screws are in
place, then secure tightly
.
See figure 10.3
Figure 10.3
Figure 10.1
