Royal-Kincool GLACIAN BCG61420, Operating Instructions Manual

Page: 5 / 16

2

Please do not leave stock on the floor of the unit. All
stock must be up on a shelf for good ventilation.

For adjustment of refrigerator supporting legs, please
refer to the following figure, with max. Adjusting
amount of 200mm.

Height adjustment: Clockwise rotate the legs to lift
and counter clockwise rotate them to lower.
Fig.2
2.5 Shelf Installation

Once unpacked and all packaging removed.

Ensure that all backing strips are mounted at the
same horizontal place with the supporting strips, and
they can be positioned according to the number on
the supporting strips.

Remove the shelf backing strips from the plastic belt.
For installation, closed end shall be located at rear
and open end at front.
1
First push the backing strip backwards to make
its rear buckle on the rear supporting strip.
2
Lift the front end of backing strip slightly and
then buckle it on the front supporting strip.
downwards.

Slide the shelves into the refrigerator.
Fig.3
Fig.4
2.6 GN Pan Installation

Remove the GN pan protective package(not
supplied).
Fig.5

Place the GN pan into the refrigerator.
Fig.6

Specifications of GN pan:
GN 1/1 for BCS6/BCG6 Range.(Fig.7)
GN 2/1 BCS7/BCG7/HPB Range.(Fig.8)
Fig.7 Fig.8

In order to ensure cold air circulation, do not place
the foods against the inner wall of refrigerator.

Please do not place foods excess the load line and
place foods evenly. The load capacity of each shelf is
30kgs.
2.7 Pizza Preparation
•
Food must only be left in the GN well during service
with no gaps left between the pans. You may need to
place an empty pan in position to maintain
temperature.
•
Please remove the GN pans after service back to the
storage section on the fridge and use night lids when
not in use.
Lift
Lower