Assembly (continued)
17
Please contact (866) 988-3300 for further assistance.
WWW.ROYALGARDEN.COM
12
Attach the support chip 1 (Q) to the right pillar (A1) and the left pillar (A2) using M8X90 combination bolt (HH), M8 washer (II)
and M8 nut (JJ); attach the support chip 1 (Q) to the left beam (B1) and the right beam (B2) using M8X90 combination bolt (HH),
M8X55 combination bolt (FF), M8 washers (II) and M8 nuts (JJ), as shown below.
Attach the support chip 2 (R) to the right pillar (A1) and the left pillar (A2) using M8X25 combination bolts (EE); attach the
support chip 2 (R) to the top tube A (D3) using M8X60 combination bolts (GG), M8 washers (II) and M8 nuts (JJ), as shown below.
Attach the support chip 2 (R) to the middle pillar (A3) using M8X25 combination bolts (EE); attach the support chip 2 (R) to the
top tube A (D3) using M8X60 combination bolts (GG), M8 washers (II) and M8 nuts (JJ), as shown below.
Once all of the bolts are in place, fully tighten the bolts.
ATTACHING THE SUPPORT CHIPS
EE
GG
GG
R
A1 & A2
II
JJ
JJ
II
D3
B2 & B1
JJ
HH
HH
Q
FF
II
II
II
JJ
A1 & A2
B2 & B1
R
GG
GG
D3
EE
A3
JJ
II
II
B1
B2
A2
A 3
A1
D 3
D 3
D 3
B2
B1
NOTE:
More than one person is required to assemble
this step and suggest using a stepladder.
