Royal Enfield Super Meteor 650 Owner'S Manual Download Page 63 | Manualshive

Page: 63 / 124

Royal Enfield Super Meteor 650 Owner'S Manual Download Page 63

61

Royal Enfield Super Meteor 650

PARKING

PARKING MOTORCYCLE ON CENTRE STAND

WARNING

Park a motorcycle is
upright on a firm and flat
surface.

Hold handle bar firmly in
a straight position.

Lower center stand, such
that, both the legs of the stand are resting on a
firm ground.

Apply pressure on the fulcrum lever on the
center stand and pull the motorcycle backward.

Lock the steering and ensure the handle bar is
locked firmly before removing the key from the
ignition barrel.

PARKING MOTORCYCLE ON SIDE STAND

Park a motorcycle is

upright on a firm and flat
surface.

Extend side stand. Tilt

the motorcycle to the left

side, till it is supported

firmly on the ground.

Ensure both stands are fully retracted before
riding the motorcycle.

Please exercise extreme care while parking and
ensure it is parked on a firm and flat surface
to avoid the motorcycle from falling over and
causing injury to you or to others and damage
to the motorcycle parts.

The side stand is only designed for the weight
of the motorcycle. Do not sit on the motorcycle
when it is resting on the side stand. The side
stand or frame may become damaged and the
motorcycle may fall over.

«
...
61
62
63
64
65
...
»

Summary of Contents for Super Meteor 650





























































































































Reviews:

No comments