Royal Enfield Classic 500 2017, Manual

Page: 120 / 144

38
REAR WHEEL REMOVAL

Place motorcycle on center stand on a firm and
flat surface.

Mark the position of the chain
adjuster butting with the stopper on
the Left side of the swing arm fork.

Hold the axle firmly and remove the
nut on the right side
 Pull out the axle from the left side
along with the chain adjuster,
taking care not to drop the wheel
collar and the spacers on the left
side.
 Tilt the motorcycle slightly to the right
and pull out the rear wheel from the sprocket lugs.

Slide the wheel in position between
the swing arms and locate the cush
rubber in the sprocket lugs correctly
such that the wheel is positioned
straight

Hold the wheel collar and spacer
in place between the wheel hub and the left side
swing arm fork and slide the wheel axle with the
chain adjuster fully and firmly through the collar,
spacer and rear wheel.

Locate the chain adjuster in the marked position
against the stopper in the swing arm.

Hold the axle firmly from the left and tighten the
nut fully on the axle on the right.
C A U T I O N
 Never hammer the wheel axle thro the spacer and
rear wheel to prevent damage to its threads. Guide
it into the wheel gently.
MINOR MAINTENANCE TIPS
REAR WHEEL REASSEMBLY

Ensure the 4 cush rubbers are seated properly in
the rear wheel hub in their locations.