36
n
Fix all the three W- Clips
properly with Brake hose
and wheel speed sensor
Cable in the locations as
WHEEL REMOVAL / ASSEMBLY
shown.
C A U T I O N
Please check the brake ho se pipe ro uting f rom
Reservoir to Master cylinder, Master cylinder to Rear
wheel caliper.
There should not be any twist or pinch in routing which
may affect braking performance.
Sharp edge instruments should not be used during
WSS cable removal and reassembly.
n
Insert the wheel speed sensor cable and Brake
hose in to the clips provided on the Swing arm,
facing WSS sensor cable at the bottom.
n
Ensure wheel speed sensor cable & Brake Hose
not entrapped between shock absorber mounting
bolt and caliper bracket.
W A R N I N G
Ensure the motorcycle does not come off center stand
while assembling / disassembling the wheel assembly.
Failure to adhere could result in damage or serious
injury.
Summary of Contents for Classic 350 2021
