Royal Enfield Bullet 500 2018, Owner'S Manual

Page: 37 / 98

36
Proper running-in is very important for obtaining maximum life and performance of a new motorcycle. The
following guidelines explain proper running-in procedures.
Since the engine is brand new, it should not be loaded excessively for the first 1,000 Kms. (600 Miles). During
the first few hundred kilometers, the various parts in the engine wear and polish themselves to the correct
operating clearances. Driving with prolonged full throttle operation, or any high speed conditions might result in
excessive heating of the engine and cause abnormal wear of the moving parts and hence must be avoided.
1. 0 - 300Miles (0- 500 Kms):
The recommended speed for the first 300 Miles (500 Kms) is 35 - 40 MPH (50 - 60 Kmph). During this
period avoid riding the motorcycle with full throttle opening. Stop the motorcycle for about 5 to 10 minutes
to let it cool down, after every hour of running. Vary the speed of the motorcycle regularly during running but
avoid using the motorcycle above 1/2 throttle opening position.
Caution :
After covering the first 300 Miles.(500 kms), please replace the engine oil and filter.
RUNNING IN