![Royal Crown RC-2DEE84 Installation Manual Download Page 14](http://html.mh-extra.com/html/royal-crown/rc-2dee84/rc-2dee84_installation-manual_1494533014.webp)
Indicates that is not an utensil placed on the glassplate, or that
utensil is not apropiate for induction.
The main sensor was activated as a protection mode. Unplugged
from the power supply, wait 10 seconds and then plugged again, if
the problem persists, please contact our service center.
The main sensor was activated as a protection mode. Unplugged
from the power supply, wait 10 seconds and then plugged again, if
the problem persists, please contact our service center..
Indicates overheating, protection mode was activated. Unplugged
from the power supply, wait 10 seconds and then plugged again, if
the problem persists, please contact our service center.
For other different code, please contact our service center for the
respective support, since those codes correspond for technical use.
Error codes
e1
e2
e3
This appliance is labeled in compliance with European directive 2012/19/EU for Waste
Electri- cal and Electronic Equipment (WEEE). By ensuring that this appliance is
disposed of correctly, you will help prevent any possible damage to the environment
and to human health, which might otherwise be caused if it were disposed of in the
wrong way.
The symbol on the product indicates that it may not be treated as normal household
waste. It should be taken to a collection point for the recycling of electrical and
electronic goods.
This appliance requires specialist waste disposal. For further information regarding the treatment, recover
and recycling of this product please contact your local council, your household waste disposal service, or the
shop where you purchased it.
For more detailed information about treatment, recovery and recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you purchased the product.