Roxio Creator, User Manual

Page: 88 / 240

Roxio Creator User Guide
www.roxio.com
88
About editing and applying effects
You can use Sound Editor to make changes to audio clips. Not only does
Sound Editor let you save your recorded audio to any other supported file
format (similar to converting audio file formats), it also lets you edit and
enhance your audio clip using the available audio effects and editing tools.
Selecting the waveform region to edit
You can apply an edit or effect to an entire audio clip or to a selected part of
a clip. To edit or add audio effects to your clip, use the playback buttons or
the Zoom buttons to identify the part of the waveform that you want to
edit. When you find the region that you want to edit, select it in one of the
following ways:
To select all tracks:
■
Choose Edit > Select All .
To select a single track, use one of these methods:
■
In the task area, under Project View, expand Tracks, and click a track.
■
To select the track immediately following the currently selected track,
choose
Edit > Select Next Track
.
■
To select the track immediately preceding the currently selected track,
choose
Edit > Select Previous Track.
To select a clip:
■
In the task area, under Project View, expand Clips, and click a clip.
To select a part of a waveform, use one of these methods:
■
In the Clip Editor, click and drag your mouse cursor from the
beginning of the selection to the end. Your selection is highlighted on
the waveform.
■
If you have inserted markers into the waveform, you can select the area
between the markers. In the Clip Editor, right-click the section of the
waveform you want to select, and choose
Select Area Between
Markers
.
C12_UserGuide.book Page 88 Friday, July 31, 2009 9:21 AM