Swii’Flo
-- USER’S GUIDE -- EUG
ROXELL --022 -- 2313
33
HAND WINCH
TROUBLE SHOOTING GUIDE
Not respecting above-mentioned instructions can cause physical
injury or material damage.
Use personal protective equipment.
DANGER
ACTIONS IN GREY BACKGROUND MUST BE DONE BY A TECHNICALLY TRAINED PERSON.
SEE TO IT THAT YOU FIRST REMOVE EACH ELEMENT WHICH CAN OBSTRUCT
A SAFE OPERATION OF THE SYSTEM!
CAUTION
PROBLEM
CAUSE
CORRECTIVE ACTION
1.
Brake doesn’t work.
a. Screw thread on the drive shaft or the
handle is damaged.
-- Replace the hand winch.
b. Screw thread on the drive shaft or the
handle is dirty.
-- Clean the hand winch dry.
-- When not ok, please ask a technically trained
person.
c. Brake disks are dirty.
-- Clean the hand winch dry.
-- When not ok, please ask a technically trained
person.
d. Handle has been screwed up against the
locknut when turning down.
-- Release the handle form the locknut.
2.
Winching up doesn’t
work.
a. Load is too heavy.
-- Limit the load till max. 300 kg.
b. Cable to load is blocked somewhere.
-- Release the cable.
c. Drum weldment or drive shaft of the hand
winch is blocked because of dirt or rust.
-- Clean the hand winch and grease where neces-
sary.
3.
Putting down the
load doesn’t work.
a. Safety lock is switched on.
-- Take the handle and unlock the safety lock.
b. Cable to load is blocked somewhere.
-- Release the cable.
c. Drum weldment or drive shaft of the hand
winch is blocked because of dirt or rust.
-- Clean the hand winch and grease where neces-
sary.
MAINTENANCE INSTRUCTIONS
Use personal protection equipment.
DANGER
-- Remove all dirt and dust after each batch or at least every 6 months.
-- See to it that the handle turns fluently on the screw thread of the main shaft.
-- Don’t use water to clean the hand winch.
-- Use grease to grease moving parts.
