Manual flushing
1. Connect the end unit to the drain hose.
2. Put the end unit valve in the flushing position.
1. Put the pressure regulator operation valve into the flushing position.
2. Flush the lines one after another (max. 3 bar/40 Psi).
3. Put all components back into their original position after flushing.
Flushing position of the end unit
Flushing with overflow
max. 5 m
Proceed as described in Manual Flushing.
The end unit is connected to the drain pipe (overflow).
1. Put always the end unit valve in flushing position.
2. Put the pressure regulator operation valve into the flushing position.
3. Put all components back into their original position.
We recommend a maximum height of 5 m for the drainage system.
The minimum height is 2 m.
House chart
min. 2 m
1020
02205508
