BOOZZTER -
USER'S GUIDE -
EU
ROXELL - 0318
12
DAILY WINCHING
TROUBLE SHOOTING GUIDE
Not respecting above-mentioned instructions can cause phys-
ical injury or material damage.
Switch off the main switch first.
Use personal protective equipment.
DANGER
ACTIONS IN GREY BACKGROUND MUST BE DONE BY A TECHNICALLY TRAINED PERSON.
SEE TO IT THAT YOU FIRST REMOVE EACH ELEMENT WHICH CAN OBSTRUCT
A SAFE OPERATION OF THE SYSTEM!
DANGER
PROBLEM
CAUSE
CORRECTIVE ACTION
1. Sensor doesn’t work.
a. Defect of sensor.
- Replace the sensor.
b. No power supply to sensor.
- Restore power supply.
- When
not ok
, please ask a technically trained
person.
c. The housing is dirty.
- Clean the motorized winch dry.
- When
not ok
, please ask a technically trained
person.
2. Winching up doesn’t
work.
a. Load is too heavy.
- Limit the load till max. 300 kg.
b. Cable to load is blocked somewhere.
- Release the cable.
c. Motor is broken.
- Replace motor.
d. Weight assembly is touching cleaning
switch.
- Winch can only go down.
e. Drop tubes to circuits are full.
- Empty drop tubes manually.
3. Putting down the
load doesn’t work.
a. Cable to load is blocked somewhere.
- Release the cable.
b. Feeding switch is touched.
- Winch can only go up.
4. Motor doesn’t work. a. Motor is overloaded.
b. Motor is too warm.
- Check CCP./motor.
- Check motor.
5. Cable is damaged.
a. Cable touches material.
- Replace the cable and prevent wearing over
hard material.
b. Suspension should be done with single/
double diversion.
- Change suspension.
MAINTENANCE INSTRUCTIONS
Switch off the main switch first.
Use personal protective equipment.
DANGER
- Remove all dirt and dust after each batch or at least every 6 months.
- See to it that the winch turns fluently on the screw thread of the main shaft.
- Don’t use water to clean the motorized winch.
- Use grease to grease moving parts.
- Check suspension cable each batch or every 6 months.
- Check the feed/fill/clean switches of the switch assembly.
- Grease switch assembly and sliding plate.
- Remove dust and dirt from the switch assembly for motorized winching.
