5. corner backrest slats
Drill a hole in each end of the four corner backrest slats. Bring together the two arbour halves and align the ends of the seat slats. Starting with the shortest (350mm) corner
backrest slat attach to the ends of the bottom seat back slats of the two sections using 1 x 60mm screw at each end. Attach the next corner backrest slat (380mm) to the
second seat back slat up using 1 x 60mm screw at each end, continue adding the remaining two slats in the same way.
6. Centre seat support
Drill pilot hole in the centre seat support as shown. Position the centre seat support between the two seat sections and secure to the seat bearers using 4 x 70mm screws.
Screw through the drilled holes into the seat slat bearers.
60mm
60mm
4. Securing the back legs
On a back leg measure and mark the seat height to the same height as on the upright panels (420mm). To the narrow edge of the post secure the seat using 2 x 60mm
screws, screw through the drilled holes in the seat bearer into the post. Secure the seat back to the post through the drilled holes in the seat back bearers using 2 x 60mm
screws and then attach the lattice using 3 x 60mm screws. Once complete, build the other half in the same way but creating a mirror image as shown.
Note:
When attaching the centre
posts ensure that it is attached
using the narrow edge of the
post.
45mm
Note:
Once complete, build
the other half of the
arbour in the same way
but creating a mirror
image so that you will
have 2 sections that
look like the picture to
the right.
Drill
Drill pilot holes in each end of the
4 centre seat back slats.
Top view of centre seat back slat
60mm
60mm
Top view of centre seat back slat
Left seat back
right seat back
Note:
Secure the centre slats by screwing
through the drill hole in the slat into
the ends of the seat back slats of the
left and right seat backs.
70mm
Drill
Drill pilot holes in the centre
seat support for each screw.
End view of centre seat
support.
Note:
Screw through the drilled
holes into the seat slat
bearer.
View from back of centre
seat support and seat
bearers.
420mm
Drill
435mm
410mm
380mm
350mm
