1. Seats to uprights
Drill pilot holes in the seat slat bearers as shown. Lay the upright on the ground and position the top of the seat bearer 420mm from the bottom of the upright. Secure
the seat the legs of the upright using 4 x 60mm screws. Screw through the drilled holes in the seat bearers into the upright legs.
Drill
Drill pilot holes in the seat bearers
for each screw.
Drill
Drill pilot holes in the back rest
bearers for each screw.
420mm
60mm
60mm
60mm
60mm
3. Back lattice pane to uprights
Drill pilot holes for the screws in the frame of the back lattice panel as shown. Sit the Back lattice panel on the top of the back rest. Secure to the upright leg using
3 x 60mm screws. Screw through the drilled holes in the lattice into the upright leg.
Seat slat bearers
Note:
To make assembly easier,
lay the upright on the
ground.
2. Back rest to uprights
Drill 2 holes in the two back rest bearers as shown. Position the back rest so the bearers sit on the bearers of the seat. Secure the back rest to the leg of the upright using
2 x 60mm screws. Screw through the drilled holes in the back rest into the leg of the upright.
Drill
Drill pilot holes in the lattice frame
for each screw.
back rest bearers
Drill
Drill
