© 2021 Rowley
®
Company. All rights reserved. R-TEC Automation
®
is a registered trademark of the Rowley
®
Company, LLC.
7
BUTTONS
SELECTING A CHANNEL
FUNCTIONAL OVERVIEW
When a channel is selected, the blue LED will stay illuminated for four seconds and then go out. The channel remains active.
Programming and operation of the window treatment(s) on the channel can proceed without reselecting the channels.
IMPORTANT
To determine which channel is activated prior to programming or operating the control simply press and release any of
the ‘channel’ buttons or the ‘stop’ button once and the active channel or channels will illuminate.
IMPORTANT
You can program one channel at a time but you can operate several channels at once if desired after the programming
has been completed.
IMPORTANT
UP
DOWN
CHANNELS 1-5
STOP
P2 Button
Select a channel by ‘toggling’ it on until a blue LED is
showing next to it. This will require pressing and releasing
the channel once or twice until the light appears.
Motor Response
Blue LEDs will illuminate indicating channel selection.
Deselect the channels that you don’t
want to be active by ‘toggling’ them off
until the blue LED disappears.
Now only the channel that you want to program or
operate will be active. Your selected channel is now
ready to be programmed or operated.
