26/40
Thermal circuit breaker
A thermal circuit breaker serves to control the temperature automatically. If the set tempe-
rature is reached, the appliance will automatically switch back to the lowest heating level.
The thermal wave heater does not switch off completely.
Tip prevention
The tip prevention is triggered as soon as the appliance exceeds a definite angle of incli-
nation. At the same time, the appliance switches off automatically. To start operating the
appliance again, this must be in a vertical position.
1.5
Technical data
Model
HWH 1000/3/1
Art. No.
1 03 03 0148
Power supply
220-240 V~50 Hz
Max. Heat output
1000 W
Heating levels
3 levels (300/700/1000 W)
Room heating capacity
(assuming a room height of 2.4 m)
approx. 29 m³
Degree of protection
IPX0
Protection class
I
Setup dimensions (W x D x H)
60.0 x 9.0 x 52.0 cm
Product weight
3.8 kg
Tab. 1a: Technical data
Model
HWH 2000/3/1
Art. No.
1 03 03 0149
Power supply
220-240 V~50 Hz
Max. Heat output
2000 W
Thermostat control
3 levels (800/1200/2000 W)
Room heating capacity
(assuming a room height of 2.4 m)
approx. 60 m³
Degree of protection
IPX0
Protection class
I
Setup dimensions (W x D x H)
80.0 x 9.0 x 52.0 cm
Product weight
4.5 kg
Tab. 1b: Technical data
GB
