Rowenta Loreal Professional SteamPod, Manual

Page: 14 / 123

13
When using the straightener, you must be able to see steam coming out and hear the noise of the steam.
If you can’t see any steam anymore and you can’t hear the noise of the steam any longer either, this means that
the water tank needs to be re-filled.
In this case, once you have re-filled the water tank, you will need to wait for about 90 seconds before the steam
starts coming out of the straightener again.
USING IT FOR THE 1 st TIME
1) Plug in the straightener.
To switch your straightener on: press and hold the on/off button until the LCD screen comes on.
2) Select the ideal temperature for the type of hair you want to straighten using the + and – buttons:
Press the – button to reduce the temperature or the + button to increase it.
• It takes 90 seconds for the straightener to heat up.
Whilst it is heating up the temperature indicator of the straightener will flash.
• There are 5 temperature settings for you to choose from: 170-180-190-200-210°C (330-350-370-390-410° F).
• When you use your straightener for the very first time, hold the plates closed until the steam appears (it will take around
90 seconds for you to obtain steam the first time you use your straightener).
• We advise you to observe the following recommendations:
• When the temperature shown on the indicator stabilises and remains constant, this means that the temperature that
you have chosen has been reached.
• After 5 seconds, the straightener will go into
LOCK AUTO mode (a padlock symbol appears on the dial). This mode prevents any
ill effects occurring if you inadvertently press on a button you shouldn’t have during use (for example pushing by mistake
on the + /- buttons during use).
• If you wish to change the temperature of your straightener, you will have to unlock it:
To unlock the straightener, press again for a few seconds on either the + button or the -.button. The control is now
unlocked and the padlock sign will disappear from the screen.
At any time you can exit the LOCK AUTO mode by pressing continuously on the – or + buttons.
4. SWITCHING ON YOUR STRAIGHTENER
Type of hair Normal Fragile Very fragile
Fine hair 200°C – 390°F / 1 to 2 runs 190°C – 370°F / 1 to 2 runs 180°C – 350°F / 1 to 2 runs
Normal hair 210°C - 410°F / 1 to 2 runs 200°C – 390°F / 1 to 2 runs 190°C – 370°F / 1 to 2 runs
Thick hair 210°C - 410°F / 1 to 2 runs 200°C – 390°F / 2 runs 200°C – 390°F / 2 runs
WARNING: Only use the water tank on a flat, stable, water and heat-resistant surface. There are feet underneath
the water tank to keep it steady during use. Place the water tank on a flat, stable, heat-resistant surface. Do not
hang your straightener by its steam cord.
4 secs 4"
4"
EN
32585_DOC_SteamPod_Notice_Revente_17L:A5 15/02/13 12:44 Page 13