Rowenta KG900812, Manual

Page: 11 / 28

11
EN
A
Removable grill plates
B
Ready LED indicator
C
On LED indicator
D
Thermostat control dials
E
Drip tray
DESCRIPTION
• Before using for the first time, thoroughly clean the plates
with warm water and a little dishwashing liquid, rinse and dry
thoroughly (fig 2) .
• The grill is made up of two independent removable plates (A)
that can be used either separately or together. When you install
the plates, make sure that they are well placed. It is necessary
that both plates are installed on the appliance, even if you only
intend to use one
(fig 3)
.
• Make sure the drip tray (E) is in position (fig 4) .
BEFORE USE
• Unwind the cord completely
(fig 5)
.
• Do not touch the metal parts of the appliance while it is
preheating or being used because they are very hot.
• Make sure the thermostat controls (D) are at the minimum
position and then plug the cord into a wall outlet.
• The ON lights (C) will turn on and remain on to indicate that the
cord is plugged in
(fig 6)
.
• Preheat the grill(s) by adjusting the thermostat controller(s) in
the desired position until the READY LED (B) indicator lights
turn-on (fig 7 & 8) .
• Note: You can set each thermostat at different temperatures if
needed depending on what you are cooking.
• You are now ready to start cooking, place your food on the
cooking plates (fig 9 & 10) .
• The READY LED indicator will intermittently turn on and off
while the appliance is in use to indicate that the temperature
is being maintained.
PREHEATING