Rowenta INTENSIUM BU262 Series, Manual

Page: 8 / 89

8
FIRST USE
Before first use, ensure that the voltage, frequency and power of your appliance are suitable for your electrical supply.
Your appliance can be used with a power plug with an earth connection. It is a class I appliance.
Before switching on your appliance, ensure that :
• the appliance is completely assembled as described in the safety instructions,
• the appliance is placed on a stable, horizontal surface,
• the appliance is positioned in accordance with the instructions given in this manual,
• The air intake and outlet grills are completely unobstructed.
When you use the appliance for the first time, it may temporarily release a faint odour and smoke (this is perfectly
normal for new appliances: it will disappear after a few minutes).
IMPORTANT : You are advised to unplug the appliance when not in use.
N.B. : In the event of abnormal overheating, safety devices automatically shut down the appliance and then restart
it once it has cooled down.
If the problem continues or gets worse, take the appliance to an approved service centre.
Appliances BU262x are equipped with a thermal fuse which shuts the appliance down completely if it is faulty.
CAUTION: Risk of fire – Do not operate heater without wheel assemblies attached.
Operate heater in upright position only (wheels on bottom, controls on top). Any other position could create a
hazardous situation.
A
Carry Handle
B
Power indicator Light
C
Thermostat button
D
Power setting button (ECO, 1, 2)
and power off (0)
E
Castors
F
Axles
G
Fixing bracket
H
Air inlet
I
Cord wrap system
CLEANING
• Your appliance must be unplugged before proceeding with any cleaning work.
• You can clean it with a slightly damp cloth.
• IMPORTANT: Never use abrasive products which might damage the appearance of your appliance.
STORAGE
• It is important to allow the appliance to cool before winding the lead.
• When you are not using your appliance, store it in a dry place.
PRODUCT DESCRIPTION (fig. 1)
MOUNTING THE CASTORS (fig. 2)
USING THE APPLIANCE (fig. 3)