Rowenta CF9022, Instructions For Use Manual

Page: 7 / 25

4. CARE
NOTE! Always disconnect the appliance before cleaning.
Cleaning the appliance and brushes:
- your appliance requires very little care, it can be cleaned with a dry or slightly damp cloth,
- never use alcohol to clean your appliance,
- never immerse the appliance or the
brush in water,
- take care to dry the parts that you have
just cleaned,
- from time to time carefully remove any
hair left in the brush.
EN
5. ENVIRONMENT PROTECTION FIRST !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
6. IN THE EVENT OF A PROBLEM
• "My hair gets tangled":
1. Did you untangle your hair properly?
2. Did you separate the sections well before working on them?
3. You can stop the brush rotation at any time by releasing the control button (C), or by reversing
the direction of rotation.
•
"The brush stopped rotating".
1. Remember that your hair must be pre-dried and untangled.
2. Is the section too thick? Work on a smaller section.
•
"My appliance has stopped working".
The thermal safety device has tripped.
1. Unplug the appliance.
2. Leave it to cool for about 30 minutes before using it again.
3. If the problem persists, contact the after-sales service.
- If the bristles were flattened before use, they will straighten naturally during blow drying thanks
to the combination of automatic rotation and hot air.
CF9022D0_1800123574_ROW 06/01/12 16:17 Page7