background image

Clean the HEPA  

Important:
When using the HEPA FILTER
SYSTEM, do not forget to remove
the air outlet foam filter and the
micro-active filter.

• Remove the filter cartridge. Remove the

HEPA filter.

• Change it every 9 to 12 months

(depending on the frequency of use).

Clean ARTEC.

Wipe the body of the appliance and

the accessories with a soft, moist

cloth, then dry. 

• Do not use strong or abrasive

cleaning products. 

TO STORE  ARTEC

• Press the 

pedal until the cord is

completely rewound. The plug
positions itself in its cavity.  

• Store accessories.

• Place it in an upright position and

slide the mount on the combination
nozzle into the tube holder. 

Subject to modifications!

FOR YOUR SAFETY: 

Read the instructions for use

carefully and keep them in a safe

place. 

Your vacuum cleaner is an electrical
appliance: it must only be used
under normal operating conditions.
The appliance should be used and
stored out of the reach of children.
Never leave the appliance
unattended when it is switched on.

The appliance is not intended for use by
young children or infirm persons without
supervision.

Young children should be supervised to

ensure that they do not play  with the
appliance.

Always keep nozzles and tube ends
well away from eyes and ears. 

Make sure that the operating
voltage of your vacuum cleaner is
the same as your supply  voltage -
230-240v.

Unplug the appliance by removing
the plug from the power outlet:
- immediately after use
- before changing accessories
- before maintenance, cleaning or
changing the dustbag 

Do not vacuum wet surfaces, any
kinds of liquids, hot substances, ultra-
fine substances (plaster, cement, ash,
etc.) large sharp debris (glass),
dangerous products (solvents,
stripping compounds, etc.), chemical
products (acids, cleaners, etc.), 

inflammable or explosive products
(petrol- or alcohol-based). 

Do not immerse the appliance in

water or store it outdoors.

Do not use the appliance:
- if it has been dropped and shows
signs of damage or functions
abnormally.
- if the supply cord is defective

In this case do not open the
appliance and call our helpline
(overleaf). 

Repairs should only be carried out
by specialists using original
replacement parts. It is dangerous
to try to repair an appliance by
yourself. Vacuum cleaner supply
cords and winding systems must, in
all cases, be replaced by an
approved Service Centre.

In accordance with current
regulations, before disposing of an
appliance no longer needed, the
appliance should be made non-
operational (by unplugging it and
cutting off the electricity supply
cord).

Appliances equipped
with an infrared remote
control contain alkaline
batteries. Do not throw
these away with
household garbage:
dispose of them at a
suitable facility. 

The company cannot accept
responsibility for damage arising
from professional use, improper use
or failure to comply with the
instructions for use. The guarantee
will be invalidated.

Your appliance conforms to the

73/23 EEC and 89/336 EEC

directives.

Reviews: