Rowan Elettronica S.r.l. www.rowan.it Tel. +39-0444.905566
pag.1
Introduction
The
340G
inverters allow an efficient and flexible control of motor speed. In this way,
the asynchronous motor can be used in a wider range of applications.
The functioning interface is made of a panel consisting of six keys, one display with
five 7-segment digits and seven leds.
The display and the keys allow you to change all the inverter parameters so as to make
it suitable to all applications.
The drive display allows the monitoring of controlled variables as frequency, current,
output voltage, cos phi, power and the storage of the last 4th alarms attempted.
QUICK START
340G
Series Digital Inverter
Warning
Electrical equipment can be hazardous to personal safety. It is essential to be fully
acquainted with the operating instructions and controls of electrical equipment before
attempting to operate it.
Equipment must only be used by technical personnel who are qualified to do so, who
are fully acquainted with the standards for installing and operating equipment in
compliance with all applicable safety standards, and who are able to fully understand
all safety-related warnings.
Capacitors inside the equipment operate at dangerously high voltages.
Always wait
at least 5 minutes after the equipment has been switched off before performing
any work on it.
Dangerous voltages may be present at the power terminals even with
the motor stopped. These are terminals U, V, W, L1, L2.
Under certain control program conditions, the machine can re-start automatically
after a power failure.
There are no user serviceable components inside the equipment. Only the terminal
cover must be removed during installation.
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
