-22-
You can take pictures with the self-timer in any shooting mode.
Use the self-timer to set a delay from the time the shutter button is pressed to the time
the image is shot.
1. Press
the button to switch between
Drive modes.
2. The selected drive mode appears on the
LCD monitor.
3. You can switch between settings by
pressing the button.
4. Shoot the image.
The self-timer lamp starts blinking after the shutter button is pressed all the way.
The image will be shot after approximately 10 seconds. The self-timer blinking gets
faster two seconds before the shutter activates.
1. Distances referred to measure the distance between the camera lens
surface and the subject.
2. Any flash setting can be used in macro mode.
3. Always use the LCD monitor to compose images in macro mode. Shooting
with the optical viewfinder is possible, however, the parallax phenomenon
may cause images composed with the optical viewfinder to be off-center.
Setting the Self-Timer
Downloaded from ManualsCamera.com Manuals