-20-
Image Quality
Purpose
Fine (5
¯
compression rate)
Shoot fine quality images
Normal (8
¯
compression rate)
Shoot normal quality images
Economy (12
¯
compression rate) Shoot more images
Use the flash according to the guidelines below
Auto
The flash fires automatically as required by the
lighting level.
Red-eye reduction, Auto The flash fires automatically as required by the
lighting level, and the flash pre-strobes before
shooting to reduce red-eye phenomenon.
Force On
The flash always fires.
Force Off
The flash does not fire.
1. Press
the
SET
button to switch
between flash modes.
2. The selected flash mode appears on the
LCD monitor.
3. You can switch between settings by
pressing the
SET
button.
4. Shoot the image.
Setting the Red-eye Reduction Function
The Red-eye reduction function fires when the flash is used in dark areas. This prevents
light from reflecting back from the eyes and making them appear red.
When shooting with the red-eye reduction function, the subjects must look right at the
flash for this mode to be effective. Try asking them to look directly at the flash. Even
better results can be obtained by shooting with the lens set to a wide angle, by increasing
the lighting indoor settings, or by approaching closer to the subject.
Using the Flash
Downloaded from ManualsCamera.com Manuals