S2
USER MANUAL
33
•
Press and hold for 2” the MEMORY [N] key.
•
The selected transponder will be automatically stored in the first blank position
of the current Memory Plan and the following screen will appear:
Press the MEAS [G] key to quit this function.
13.3 DELETE A USER DEFINED MEMORY PLAN
THE MEMORY PLAN CURRENTLY IN USE CANNOT BE DELETED. THE
SATELLITE MEMORY PLANS PROGRAMMED EX FACTORY (EUTE70, PANS68,
…), CANNOT BE DELETED.
Please refer to chapter 9 (using the PLAN [D] key).
Press and hold for 2” the MPEG PROG SERVICE
[B] key. Press the SELECT
[M] key to highlight FILE MANAGER. Press the UP [H] key.
~
DELETE A USER DEFINED MEMORY PLAN
Press the SELECT [M] key to highlight SELECT TYPE. Press either the UP [H] or
the DOWN [L] key to select PLAN.
Press the SELECT [M] key to highlight SELECT FILE.
Press either the UP [H] or the DOWN [L] key to select the name of the Memory
Plan to be deleted (PLAN 1, PLAN 2, …).
Press the SELECT [M] key to highlight DELETE FILE.
Press the UP [H] key to delete the selected memory plan.
The meter will show the message DELETED! to indicate that the Memory Plan
has been deleted. The message VOIDED! I indicates that a not-deletable Memory
Plan (e.g. EUTE70) has been selected for cancellation.
~
DELETE A LOGGER FILE (LOGGER MEMORY PLAN)
The LOGGER Memory Plans contain the results of the AUTO MEAS&STORE
function, to say, measurements automatically performed by the meter either on the
whole transponders of a satellite or on the whole transponders of a custom
Summary of Contents for S2 SCOUT
Page 42: ...S2 USER MANUAL 42 NOTE...
Page 43: ...S2 USER MANUAL 43 NOTE...
