S2
USER MANUAL
19
TO COMPLETE THIS OPERATION, IT MIGHT BE POSSIBLE TO GO BACK TO
THE LEVEL/POWER MEASURE SCREEN, BY PRESSING REPEATEDLY THE
MEAS [G] KEY.
IT IS NOT POSSIBLE TO MODIFY THE SIGNAL TYPE FROM OTHER SCREENS.
Press repeatedly the SELECT [M] key to highlight LNB.
To modifiy the polarization and the high/low band, press repeatedly the UP [H] and
DOWN [L] keys up to reach the desired values.
Press once the SELECT [M] key to highlight DiSEqC, and then set the desired value
by pressing the UP [H] or DOWN [L] key.
Press once the SELECT [M] key to highlight the L.O., and then set the required value
by pressing the UP [H] or DOWN [L] key. To quickly change the frequency, just keep
pressed either the UP[H] or DOWN [L] key up to reach the desired frequency.
Press once the SELECT [M] key to highlight S.R. (Symbol Rate), and then set the
required value by pressing the UP [H] or DOWN [L] key. To quickly change the
Symbol rate, just keep pressed either the UP[H] or DOWN [L] key up to reach the
desired value.
Press repeatedly the SELECT [M] key to highlight the and then set the required value
by pressing the UP [H] or DOWN [L] key. To quickly change the frequency, just keep
pressed either the UP[H] or DOWN [L] key up to reach the desired frequency.
Press the HELP [P] key to start the automatic tuning of the selected transponder. The
following screen will be shown while performing this operation:
When this operation is completed, the following screen will be shown:
Summary of Contents for S2 SCOUT
Page 42: ...S2 USER MANUAL 42 NOTE...
Page 43: ...S2 USER MANUAL 43 NOTE...
