Wipers & Washers
WIPER BLADE RENEWAL
1. Retaining Clip
2. Wiper Blade
3. Wiper Arm
Lift the wiper arm away from the screen, press the
Retaining clip and slide the wiper blade down the
Arm to withdraw.
Position the new blade assembly on the wiper arm
Push into engagement with the wiper arm and
Check that it is secure. Always fit replacement
Wiper blades that are identical to the original
Specification.
WASHER JET ADJUSTMENT
Insert a needle into the hole in the jet and lever
Gently to reposition. Direct each pair of windscreen
Jets so that the inside spray is to the middle and the
Outside spray is to the top of the windscreen.
Direct the spray at the top of the screen.
Cleaning Blocked Jets
Use a thin piece of wire as a probe to clean a
Blocked jet.
