VERTICAL CONTACT TOASTER
20
P/N 1011233 Rev. B 09/13
Problem
Possible Cause
Corrective Action
Toaster makes
unusual sounds.
Compression Settings are too tight.
Set Bun Thickness Compression Knobs to the
correct (or larger) setting.
Silicone Belts are installed incor-
rectly.
Silicone Belts must be installed as described in the
Maintenance section of this manual.
Silicone Belt Pin rubbing on housing. Center the Pin in the Silicone Belt zipper.
Roller Tensioner(s) bent or missing.
Measure, adjust, or replace the Roller Tensioner(s)
as described in the Maintenance section of this
manual.
Conveyor Belt Chains have
stretched.
Measure and adjust the Conveyor Belt Chains as
described in the Maintenance section of this
manual.
Conveyor Belt Chains adjusted
incorrectly.
Sugar and/or carbon has accumu-
lated inside the Silicone Belt and
between the Conveyor Belt Chain
and Tensioner Slide Rails.
Remove Silicone Belts, clean Conveyor Belt Chain
links just as you clean the Silicone Belts daily, and
then clean the Slide Rails on the Tensioners. Next,
clean the Silicone Belt on both sides before
reinstalling it.
Motor Drive Chain needs lubrication. Lubricate the Drive Chain carefully with Lubit-8 (P/N
2140152)
at least once a year.
A Conveyor Shaft bearing is binding. Contact your maintenance person or Authorized
Service Agency for service.
TROUBLESHOOTING (continued)
