Roundshot VR Drive Instruction Manual Download Page 84

Page: 84 / 150

23/05/2019

Roundshot VR Drive Instruction Manual

–

Firmware Version 2.023

4.6.1 Settings/general (continued)

Click on

“key”

to display the software key.

The software key is used to

activate the VR Drive modes

(“quality”,

“speed”, “turntable”, “video”, “

timelapse

”, “HDR”).

This key is

specific to the VR Drive hardware ID

It will be delivered with your VR Drive or when upgrading to a new

software mode.

If you received a

new key

after upgrading, enter it here.

Confirm with

“OK”.

After entering a valid key, the software displays

the available

software modes.

When entering an invalid key, the last valid key will be loaded.

Confirm with

“OK”.

key

A983BB9CD73A98CD

key

The software key is
valid. The following

modes are now

available:

quality

speed

turntable

video

version

Firmware : V2.023

(21.12.2018)

Bootloader : V1.02

192.168.1.15

Summary of Contents for VR Drive























































































































































Search results

Summary of Contents for VR Drive

Reviews:

Roundshot VR Drive, Instruction Manual, Page: 84 / 150

Search results

Summary of Contents for VR Drive

Reviews: