23/05/2019
53
3.2.2 Wizard workflow for turntable mode
In
“turntable”
mode the camera captures images of a rotating object on a turntable
for object movies. the hardware configuration is totally different from any other
mode and therefore the program creation workflow is totally specific.
This section presents the parameter workflow generated by the wizard when
selecting
“turntable” mode
.
3.2.3
Wizard workflow for “
timelapse
” and “video” modes
“Video”
and
“
timelapse
”
modes, are used to move the camera smoothly through a
custom path generating an animated movie.
The main differences between these 2 modes are:
•
In
“
timelapse
”
mode the VR Drive is used to release the camera and take
pictures every ... seconds or degrees. The images will later be compiled together
and accelerated to get a timelapse movie.
•
In
“Video”
mode the VR Drive is used as a pure motorised arm. No image is
captures and the camera needs to be set to capture a video.
This section presents the parameter workflow generated by the wizard when
selecting “
timelapse
” or “video” modes. These mode were grouped in 1 diagram as
they have many common parameters. Specific parameters for each mode are shown
in the following colours:
Specific parameters
Roundshot VR Drive Instruction Manual
–
Firmware Version 2.023