Page 8 of 16
Loading the Grease Gun
Removing the Cartridge
1. Pull out the plunger handle (6) to its maximum distance and lock it in place.
2. Remove the grease gun head (2) by turning it counter-clockwise.
3. Remove empty cartridges.
Always follow the steps listed above before loading the gun. There are three ways to load this grease
gun:
•
Cartridge Loading
•
Bulk Fill
•
Filler Pump Loading
⚠
WARNING
•
Grease or empty cartridge in barrel is under pressure from the internal spring, be alert when
removing head of the barrel.
•
Do not apply excessive torque or over-tighten the grease gun head as this will apply undue stress
to the die cast outlet and may cause it to fracture.