CHAIN BREAKER
·
RIGHT OR LEFT HAND USE
Chain break comes ready for right-handed use. If left-handed use is preferred, follow the
instructions
below.
Step1.Unscrew set screw and remove handle. (Illus b)
Step2.Remove plastic cap. with screwdriver, depress spring-loaded punch holder to free up cam.
(Illus c-d)
Step3.Slide cam out right side of chain breaker unit.(Illus e)
Step4.Reinsert cam into opposite side of chain breaker unit. Depress punch holder and insert cam.
(Illus f)
Step5.Replace plastic cap and reinsert handle. Tighten set screw with Allen wrench.
Step6.Remove stop pin from right side of unit and reinsert into left side.( Illus g)
·
REPLACING PUNCH
Step1.To remove worn or damaged punch, loosen set screw with Allen wrench.( Illus h)
Step2.Insert new punch into punch holder(push punch up unit fully seated).Tighten set screw. (Illus
i)
·
REPLACING BROKEN DRIVELINKS
(point of breakage usually occurs at or near the rivet hole.)
Step 1.To remove a cutter or the strap and half of broken drive link, join the two broken sections
