16.
Install the 2 supplied 12mm
-
1.5 x 40mm hex head bolts with the (2) 1/2” washers into the rear crossmember mount.
Tighten using a 19mm socket.
See Photo 14.
17.
Tighten the front upper bracket 1/2” bolts using a 3/4 socket and wrench.
18.
Tighten the front 3/8” bracket to skid plate bolts using a 9/16 wrench and socket.
19.
If installing the Rough Country transferase skid plate follow the instructions with that skid plate if not skip to the next
step.
20.
Install the gas tank crossmember back onto the vehicle using the OE hardware. Check the cut areas for clearance
around the new skid plate. Tighten using a 18mm socket.
See Photo 15.
21.
The hole in the skid plate will be used to access the oil drain plug in the oil pan.
See Photo 16.
Photo 14
Photo 15
Photo 16
Install the rear hardware.
Install the gas tank crossmember.
Oil drain plus access hole.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all
applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item.
It shall be the
buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items
listed, illustrated or sold.
The buyer expressly agrees to indemnify and hold harmless Rough Country,
LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.
Photo 13
Install the supplied 3/8’s hardware.
