13.
Install the front bumper with the OE hardware. Adjust the bumper along with bumper brackets behind the bumper
to the correct height, along the grill and the headlights torque to factory specs using an 18mm socket.
See Photo
13.
If
equipped with fog lights or sensors plug these harnesses back together, re install the 3 push pins with splash
guard in the bumper.
14.
Install the EXO bumper onto the mounts, using the supplied 1/2” X 1 1/2” bolt, lock washer and washer through the
holes in the bumper into the frame mount. Do not tighten at this time.
See Photo 14
-
15.
15.
Install the supplied 12mm X 120mm long bolt, lock washer, and flat washer in the bottom hole in the bumper,
torque the 1/2” hardware to 90ft
-
lbs using a 3/4” socket and the 12mm hardware to 75ft
-
lbs using an 18mm socket.
See Photo 16.
16.
Install the flush mount lights and winch per instructions included in corresponding kits.
17.
Install the light bar in the mount with instructions included in light bar kit.
See Photo 17.
18.
Install the light bar mount on the bumper with the supplied 12mm x 35mm bolts, flat washers and lock nuts.
See
Photo 18.
Torque to 75ft
-
lbs using an 18mm wrench and 19mm socket.
19.
Install the supplied d
-
rings.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all
applicable , State, and Local laws and regulations regarding the purchase, ownership, and use of the
item.
It shall be the buyers responsibility to comply with all Federal, State and Local laws governing
the sales of any items listed, illustrated or sold.
The buyer expressly agrees to indemnify and hold
harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, owner-
ship, or use of the items.
Photo 13
Photo 14
Photo 15
Photo 16
Photo 17
Photo 18
Install front bumper.
Install EXO bumper.
Install 1 1/2” hardware.
Install 12mm x 120mm hardware.
Install light bar in hoop.
Install the hoop onto EXO bumper.
