1.
Place the vehicle in park, If the bumper is equipped with fog lights or sensors unplug these harnesses.
See Photo
1.
2.
Remove the push pins in the splash guard located on the back side of the bumper, use an auto trim puller, save for
reuse.
See Photo 2.
3.
Remove the 2 bolts on the brace on the back side of the bumper on the drivers and passengers side, using a 13mm
socket.
See Photo 3.
Save hardware for reuse.
4.
Remove the 2 bolts and the 2 flag nuts on each side of the front bumper, using a 18mm socket.
See Photo 4.
Save
hardware for reuse.
5.
Once all of the bolts are removed from the bumper mounts, set the bumper aside.
See Photo 5.
6.
Remove the 3 bolts from the bottom side of the tow hook / bumper mount on each side, use a 18mm socket.
See
Photo 4.
Photo 1
Photo 2
Photo 3
Photo 4
Photo 5
Photo 6
Unplug appropriate wiring harnesses
Remove splash guard.
Remove bumper brace bolts.
Remove front bumper bolts.
Remove front bumper.
Remove tow hook / bumper mount.
INSTALLATION INSTRUCTONS
