rotork IQ Multi-Turn, Full Configuration, Status And Monitoring User Manual

Page: 51 / 68

A4 US
US
A4
US A4
US
A4
A4 US
US
A4
US
A4
A4 US
IQ3 Full Configuration Manual – Section: Data Log
51
4.2.2 Event Logs – Error Event Log
Stopped
Time: 20:21:20 22/05/2013 Event:150
Battery Mains Fail
Cust. Sup. Fail Phase Loss
TrqTrip Mid OP TrqTrip Mid CL
Trq Hi Alarm Trq HiHi Alarm
Motor Stall Control Alarm
Actuator Alarm Valve Alarm
Encoder Alarm Network Alarm
Scroll
Event
1/5
Error Event Log
This screen displays the parameters of any events classed as
an error or alarm. The parameters are not selectable and are
displayed by scrolling down. The parameters show both internal
and external alarms related to power supplies, valve torque and
motor stall events and can be used to diagnose a range of issues.
The checkbox indicates the condition or error has occurred.
To scroll through the error parameters use and .
To scroll through the error events use and .
Battery
- Displays the battery status.
Mains Fail - Displays the mains power failure
status.
Cust. Sup. Fail
- Displays the customer supply status.
Phase Loss
- Displays the phase loss status.
TrqTrip Mid OP
- Displays the open torque trip status.
TrqTrip Mid CL - Displays the close torque trip status.
Trq Hi Alarm - Displays the Hi alarm status.
Trq HiHi Alarm - Displays the Hi-Hi alarm status.
Motor Stall - Displays the motor stall status.
Control Alarm - Displays the control alarm status.
Actuator Alarm - Displays the actuator alarm status.
Valve Alarm - Displays the valve alarm status.
Encoder Alarm - Displays the encoder alarm status.
Network Alarm
- Displays the network alarm status.
Hardwired Fail
- Displays the hardwired control status.
Comms Loss
- Displays the communications loss
status.
ChkSum Err - Displays the check sum error status.
MEM Missing
- Displays the EEPROM missing status.
Opt Not Detect
- Displays the option not detected
status.
Trq Sensor Fail - Displays the torque sensor status.
PStroke Fail - Displays the partial stroke status.
Warm Reset
- Displays the software reset status.
Limp Home
- Displays the Limp Home Status.
Status
- Internal use only.
4.3 Data Log – Trend Logs
Stopped
Trend Logs
Temperature
Battery
Vibration Average
Vibration Peak
Trend Logs
Press to view the selected Trend Log.