18
Dismantling & Disposal
Remove power supply pressure before removing
and disassembling the equipment.
Disassemble only control panel equipment (if present) and
dismantle according to the following:
Dispose of the pieces of steel, cast iron and aluminum
alloys as metal scraps.
Dispose of the rubber, PVC, resins etc. separately, in
accordance with the existing national and regional
regulations.
Electric components are to be separately disposed of on
specialized disposal sites.
Single Acting Actuator contain spring potential
energy.
Actuator cannot be disassembled by the End User.
Actuator has to be returned to the manufacturer’s
plant, upon agreement with Rotork Fluid Systems.
Actuators manufactured after 1993 year do not contain
asbestos or its by-products.
Rotork Sales and Service
If your Rotork actuator has been correctly installed and sealed, it
will give years of trouble-free service. Should you require
technical assistance or spares, Rotork guarantees the best service
in the world. Contact your local Rotork representative or the
factory direct at the address on the nameplate, quoting the
actuator type and serial number.
Some actuators have a special spare parts list. Refer to the
project specific documentation for further details