12
11
(11) Dust Extraction Connection
WARNING
a) Unplug the machine when replacing the blade, and properly press the
BLACK spindle lock button to lock the spindle and remove the clamping flange.
b) Do not use the machine in any case when the spindle lock
is blocked. Slightly push the spindle lock button.
c) If the spindle lock can not reset by pressing the spindle lock
button, loosen the clamping flange with the Allen key and turn the blade back and forth
manually. The spindle lock will reset to its normal position.
Dust Extraction Hose
Extracting dust is very helpful for keeping the work area clean because a great deal of dust is
produced when working with the Rotorazer 3000 Series, RZ120. Because the cutting blade is almost
completely enclosed in the saw body, extracting dust is particularly effective in this case. A dust
extractor or vacuum cleaner can be attached to the hose (15), which is in turn attached to the
connector for the dust extraction device.
a) Unplug the Rotorazer 3000 Series, RZ120 and attach the vacuum hose adapter (15) to the
connector for the dust extraction connection (11). Attach the vacuum hose (16) to the vacuum
hose adapter (15).
b) Check to make sure the blade guard moves freely.
c) Use the cone-shaped adapter on the nose to connect the vacuum hose (16) to a vacuum.
Tips
1. Make sure that the vacuum can be used with a Rotorazer 3000 Series, RZ120.
Most dry and wet household vacuum cleaners can be used.
2. Using a dust extractor is very practical when making several cuts one after another because
it reduces the need to stop as often to clean the tool and the work area.
3. Always use a dust extractor when cutting materials that generate dust that can be harmful,
such as certain kinds of wood flooring, medium-density fibre board and ceramic.
ASSEMBLY
ASSEMBLY
Before using the for the first time, see instructions below:
Unpacking
1. Open the shipper box and carefully remove the case.
2. Remove the packing material.
3. Remove the packing protection and transport materials (as applicable).
4. Check to make sure the case contains all the parts.
5. Check the tool and accessories to determine if any damaged occurred during transport.
Always select the correct blade type for your cutting material.
BLADE TYPE
(18) Tungsten Carbide cutting blade - Model# RRPTC01
Description: 85 mm
Suitable for:
Soft wood, hard wood, boards of any type, plastics
(19) Diamond cutting blade - Model# RRPD01
Description: 85 mm
Suitable for: Ceramics, tile
(20) High-Speed Steel cutting blade - Model# RRPS01
Description: 85 mm, tooth setting left / right
Suitable for: Soft wood, soft metals such as aluminium, copper, plastics
WARNING
Wear gloves to prevent cuts. Do not use under any circumstances abrasive blades.
Replacing the Saw Blade
(See Figure on Page 9 & 10)
1. Push down the spindle lock (17) and loosen the clamping screw (4) with the Allen key (19)
(to open turn clockwise).
2. Now lift off the clamping screw (4) with the clamping flange
.
3. Press the lock on the safety guard (14), push back the movable safety guard and hold it firmly.
4. Take off the saw blade.
5. Clean the flange and install saw blade. Pay attention to the direction of motion
(check the arrows on the housing and on the saw blade).
6. Push down the spindle lock (17) (until it clicks into place) and, using the Allen key (19), tighten
the clamping screw (4). The arrow on the saw blade must coincide with the arrow on the
saw, matching the direction of the rotation (marked on the appliance).
(4) Allen Clamping Screw
(17) Spindle Lock Button
