4
3
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating the Rotorazer
Saw 3000 Series, RZ120. DO NOT USE a Rotorazer Saw 3000 Series, RZ120 while you are tired or
under the influence of drugs, alcohol or medication. A moment of inattention while operating
Rotorazer Saw 3000 Series, RZ120 may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce risk of personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the OFF-position before connecting to
a power source and/or battery pack, picking up or carrying the tool. Carrying Rotorazer Saw®
RZ120 with your finger on the switch or powers up Rotorazer Saw 3000 Series, RZ120 may invite
accidents.
d) Remove any adjusting key or wrench before plugging in & turning the Rotorazer Saw 3000
Series, RZ120 ON. A wrench or a key left attached to a rotating part of the Rotorazer Saw 3000
Series, RZ120 may result in personal injury.
e) Unplug the machine when replacing the blade, then properly press the BLACK spindle lock
button to lock the spindle and remove the clamping flange.
f) Do not overreach. Keep proper footing and balance at all times. This enables better control
of the Rotorazer Saw 3000 Series, RZ120 in unexpected situations.
g) Use suitable clothing. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in
moving parts.
h) Whenever dust extraction or dust collection devices are needed for connection, ensure these
are connected and properly used. Use of dust collection can reduce dust-related hazards.
4) Rotorazer Saw® RZ120 use and care
a) Do not force the Rotorazer Saw 3000 Series, RZ120. Use the correct power tool for your applica-
tion. The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use Rotorazer Saw 3000 Series, RZ120 if the switch does not turn it ON and OFF. Any
Rotorazer Saw® RZ120 that cannot be controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source from the Rotorazer Saw 3000 Series, RZ120 before
making any adjustments, changing accessories, or storing the Rotorazer Saw 3000 Series, RZ120.
Such preventive safety measures reduce the risk of starting the Rotorazer Saw 3000 Series,
RZ120 accidentally.
d) When idle, store Rotorazer Saw 3000 Series, RZ120 out of the reach of children and do not allow
persons unfamiliar with the Rotorazer Saw 3000 Series, RZ120 or these instructions to operate
the Rotorazer Saw 3000 Series, RZ120. Rotorazer Saw 3000 Series, RZ120 is dangerous in the
hands of untrained users.
e) Take care of your Rotorazer Saw 3000 Series, RZ120. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may affect the Rotorazer Saw 3000
Series, RZ120’s operation. If damaged, have the Rotorazer Saw® RZ120 repaired before use. Many
accidents are caused by a poorly maintained power tool.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the Rotorazer Saw 3000 Series, RZ120, accessories and tool bits etc. In accordance with these
instructions, taking into account the working conditions and the work to be performed. Use
of the Rotorazer Saw 3000 Series, RZ120 for operations different from those intended could
result in a hazardous situation.
h) Use a clamp or other practical way to secure and support the work piece to a stable platform.
5) Service
Have your Rotorazer Saw 3000 Series, RZ120 serviced by a qualified repair person using only
identical replacement parts. This will ensure that safety of the tool is maintained.
Turn off the Rotorazer Saw 3000 Series, RZ120 immediately if:
1) The power plug and/or power cord are defective.
2) The switch is defective.
3) Smoke comes out or there is a burning smell.
General Rotorazer Saw 3000 Series, RZ120 Safety Warnings
WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury. Save all warnings and
instructions for future reference. The term "Rotorazer Saw® RZ120" in the warnings refers to your
electric (corded) Rotorazer Saw 3000 Series, RZ120.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate Rotorazer Saw 3000 Series, RZ120 in explosive atmospheres, such as in the
resence of flammable liquids, gases or dust. Rotorazer Saw 3000 Series, RZ120 can create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating Rotorazer Saw 3000 Series, RZ120.
Distractions can cause you to lose control.
2) Electrical safety
a) Rotorazer Saw 3000 Series, RZ120 plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) Rotorazer Saw 3000 Series, RZ120.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose Rotorazer Saw 3000 Series, RZ120 to rain or wet conditions. Water entering
Rotorazer Saw 3000 Series, RZ120 will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the Rotorazer Saw
3000 Series, RZ120. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock. Do not use the cord for purposes other
than those for which it was designed.
e) When operating Rotorazer Saw 3000 Series, RZ120 outdoors, use an extension cord suitable for
outdoor use. Using a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating Rotorazer Saw 3000 Series, RZ120 in a damp location is unavoidable, always use a Ground
Fault Circuit Interrupter (GFCI) protected supply. Use of an GFCI reduces the risk of electric shock.
Use Proper Extension Cord. Make sure your extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to carry the current your product will draw.
An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
Table 1 shows the correct size to use depending on cord length and nameplate ampere rating. If
in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.
SAFETY WARNINGS
SAFETY WARNINGS
