Rotor Bar Blender
CH-3661 Uetendorf
© Rotor Lips AG
16
Instruction Manual
8. MOTOR PROTECTION (OVERLOAD PROTECTION SWITCH )
When the machine is overloaded or overheated, it switches off
automatically.
After about 60 seconds press the black button on the bottom plate
of the motor base and switch on the machine as usual.
Charge the machine less than before.
If you notice any irregularities or defects, please contact your
supplier. For more information see chapter “Repairs”.
9. CLEANING
Pull out the plug before cleaning!
The motor unit must never be submerged in, or sprayed with water
or any other liquid! Never attempt to clean it with a water jet!
When the machine stops automatically, immediately remove the complete
container from the motor unit, pull out the plug and swich off the machine.
If necessary, clean the motor unit with a damp cloth.
Danger!
Thorougly clean the machine after use every time. Incorrect and careless
cleaning could put the consumer at considerable risk of micro-organism
infection.
Summary of Contents for RBB2
Page 2: ......
