2
Pack Mount Extension:
This Mount Handle enables two Fuel Packs to be mounted on top of each
other.
Step 1
- Insert
Extension Handle
into the Upright
Base then tighten
while keeping the
indents on the
Lower Wing (see
Figure 10
) aligned with
the bumps on the Fuel Pack (see
Figure
11
) until the Extension Handle is
sufficiently tight and the Upper Handle
and Lower Wing are perpendicular to each other (see
Figure 12
).
Step 2
- Mount another Fuel Pack
onto the extension handle.
(see
Figure 13
)
Step 3
- Tighten T-
Handle or other
handles (LOX, or DLX)
to desired tension.
(see
Figure 14
)
