Roto-Mix 720-16, Operations & Parts Manual

Page: 24 / 79

24
LUBRICATION
DISENGAGE PTO & SHUT OFF POWER BEFORE LUBRICATING THE MACHINE.
LOOSE OR FLOPPY CLOTHING SHOULD NOT BE WORN BY THE OPERATOR.
OIL BATH: Fill the oil bath with 30 weight motor oil to sight plug level.
GREASE BANK: Grease every 10 hours.
FRONT END BEARINGS: Grease every 10 hours.
INPUT BEARINGS: One (1) on input shaft beneath mixer/feeder. Grease every 10 hours.
PTO SHAFTS & U-JOINTS: Grease every 10 to 20 hours.
HYDRAULIC PUMP DRIVE LINE: Inspect and grease every 10 hours.
2:1 GEARBOX: Prior to operation, remove the uppermost plug and replace with vent plug
provided. After the first 100 hours of operation, drain the initial oil, preferably warm.
Flush the gear case with an approved non-flammable, non-toxic solvent and refill with
oil. Thereafter oil should be changed every 2000 hours or every 12 months, whichever
occurs first. Fill the gearbox to the check oil level with (Mobil Delvac Synthetic Gear Oil
75W-90).
MIXER DOOR CYLINDER HYDRAULICS (TRUCK): Replace hydraulic filter after first 100
hours of operation then every 500 hours of operation with 10 micron element. Replace
fluid every 2000 hours of operation or every year, which ever occurs first, with
approximately 1 gallon (3.7 liters) of (
Citgo Transguard tractor hydraulic oil or equivalent
).
SAFETY
READ BEFORE
YOU FEED
SAFETY
READ BEFORE
YOU FEED
SAFETY
READ BEFORE
YOU FEED
FILL OIL HERE ON
TRUCK DRIVELINE
CHECK OIL LEVEL HERE
ON TRUCK DRIVELINE
CHECK OIL LEVEL HERE
ON STATIONARY DRIVES
FILL OIL HERE ON
STATIONARY DRIVES