Roto Frank C600 Installation Maintenance And Operating Instructions Download

Page: 41 / 64

Subject to change.

Roto Safe C | C600 | C600 – Tandeo | H600

IMO_457_DE_v0



July 2017



Installation

Drilling and routing dimensions on the frame

C600 – Tandeo with 2 automatic bolts (A)

Routing axis

19.5

14.5

9.5

19.5

Faceplate marking

Carry out routing in accordance with the adjacent
drawing.

NOTE

The routing refers to PVC and aluminium
strikers.
Request the routing drawing for wood strikers.

NOTE

The routing depth depends on the leg height
on the striker.

Example – Combination striker:

– Striker height =

24.5 mm

– Leg height =

7 mm

– Min. routing depth = 17.5 mm

NOTE

The routing axis depends on the profile.

Drilling and routing dimensions on the frame
C600 – Tandeo with 2 automatic bolts (A)

Pattern

0201

738

632

0203

738

752

0205

738

382

0207

738

982

0293

738

1282

Summary of Contents for C600

































































Search results

Summary of Contents for C600

Reviews:

Related manuals for C600

Brands by name

Popular brands

Roto Frank C600, Installation Maintenance And Operating Instructions

Search results

Summary of Contents for C600

Reviews:

Related manuals for C600

Brands by name

Popular brands