Rothewald 10010259, Instructions For Use Manual

Page: 7 / 27

13 12
5 | How to use
First check that your motorcycle is suitable for safely using the Rothewald Rear
Wheel Removal Aid – the tyre width of the wheel to be removed must be between
90 and 220 mm. If you use a motorcycle stand to jack up the motorcycle, check
that it leaves enough space for the Rothewald Rear Wheel Removal Aid so that both
products can be used together.
When removing the wheel, the workplace should be clean and well-lit and the
surface level with suffi cient load-bearing capacity. Prepare the tool required for
removing the wheel. Place the motorcycle securely on the stand. To use the
Rothewald Rear Wheel Removal Aid, the wheel must be at least 70 mm from the
ground. Adjust the runner width of the Rothewald Rear Wheel Removal Aid to fi t the
width of the tyre being worked on. Now slide the Rothewald Rear Wheel Removal Aid
under the wheel and adjust the feet so that it is just touching the tyre and does not
wobble. Then consult a workshop manual to remove the rear wheel.
When fi tting the wheel, you can use the pre-set rear wheel removal aid to support
the wheel so that it is at swinging height with the wheel bearings. This allows
the axle to be easily inserted into the wheel bearings and the required existing
distances between the wheel and the swing arm to be set effortlessly.
6 | Storage and care
Do not store the Rothewald Rear Wheel Removal Aid in rooms with high humidity.
Maximum air humidity 80% (non-condensing). Protect the Rothewald Rear Wheel
Removal Aid from corrosion using a hard-wax vehicle care product.
7 | Warranty
Your Rothewald Rear Wheel Removal Aid is covered by the statutory two-year
warranty. The warranty period begins on the date of purchase. The warranty does
not cover normal wear and tear, use for anything other than the intended purpose,
damage caused by an accident or by modifi cations or attempted repairs to the
Rothewald Rear Wheel Removal Aid by unauthorised persons, or changes to its
technical specifi cation.
8 | Disposal
Dispose of packaging material and the product itself according to
applicable local regulations.
9 | Contact
If you have any questions about the product and/or these instructions, before
using the product for the fi rst time, please feel free to contact our Service Centre
by e-mail at: order@louis.de. We will help you as quickly as possible. This is the
best way to ensure that your product is used correctly.
Made in China