background image

ENGLISH

15

d)

Under abusive conditions, liquid may be ejected from the battery; avoid contact. If 
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek 
medical help.

Liquid ejected from the battery may cause irritation or burns.

6) Service

Have your power tool serviced by a qualified repair person using only identical re-
placement parts.

This will ensure that the safety of the power tool is maintained.

The term press jaw also includes main Jaw and press ring.

ROMAX Compact:

Never hold your fingers or other body parts in the working area of the cylinder or the press jaws.
Remove the battery before carrying out any work on the machine.
If the device is so badly damaged that electric cables or drive parts are exposed, disconnect the 
mains plug immediately and contact your service outlet. Unauthorised repair work may result in 
the user suffering major injuries or even death.
Only personnel trained in how to use the device may make crimp pipe joints using the ROMAX 
Compact.
The machine may only be used with a press jaw inserted into it. The press jaw must be in per-
fect technical condition.
Only start the machine if it is in perfect working order.
Servicing and repair work may only be carried out by workshops authorised by ROTHEN-
BERGER.
Use only suitable press jaws and press fitting systems that have been approved by ROTHEN-
BERGER.
After you have inserted the press jaw check that the bolt is securely locked.
In the event of problems during the pressing process, press the EMERGENCY STOP button.
Check that the pipe joint is secure after you have completed the pressing process.
Imperfect pipe joints must be compressed again using a new fitting.
Follow the installation instructions supplied by the fitting and pipe manufacturers.
Assure by pressing leaky press fittings that no humidity respectivily lotic water reaches into the 
inside of the machine!
After finishing the work, check the installation with appropriate testing equipment and assure that 
it is leakproof!

Battery / Charger:

This charger is not intended for use by children and persons 
with physical, sensory or mental limitations or a lack of experi-
ence or knowledge. This charger can be used by children aged 8 
and above and by persons who have physical, sensory or mental 
limitations or a lack of experience or knowledge if a person re-
sponsible for their safety supervises them or has instructed 
them in the safe operation of the charger and they understand 
the associated dangers.

Otherwise, there is a danger of operating 

errors and injuries 

Supervise children during use, cleaning and maintenance.

This 

will ensure that children do not play with the charger.

Do not charge non-rechargeable batteries!

 

RISK OF EXPLOSION! 
Physical injury!! 

Summary of Contents for ROMAX Compact





















Reviews: