20
ENGLISH
Press the
and
buttons simultaneously until “Configuration” is displayed on the
screen. The device is switched on and it will now search for all Bluetooth devices present in
the vicinity.
Set the headphones to pairing mode. (More detailed information can be found in the head-
phones operating instructions.)
The name of the headphones will be displayed on the screen as soon as the device detects the
headphones. OK will be displayed on the right at the bottom of the screen.
“ERROR” will be displayed on the screen if the headphones are not detected. Press the button
below REPEAT if you want to repeat the search. Press the button below IGNORE if you want to
use the ROLeak Aqua 3Plus without headphones.
Press the
button directly below OK to accept the displayed headphones.
An audio connection will be immediately established between the ROLeak Aqua 3Plus and the
headphones after successful pairing. The device is ready for measuring.
The device and the headphones will now detect and connect to each other automatically when-
ever they are switched on.
7.2
Using the device without headphones
The ROLeak Aqua 3Plus can also be used without any headphones being connected to it. The
recorded noise level will only be displayed on the screen.
Proceed as follows:
Switch the device on. The device will now search for all Bluetooth devices present in the vi-
cinity.
Wait for approx. 10 seconds until this message is displayed on the screen:
Press the
button below IGNORE. The screen will change over to the measured value
display. The device will start measuring. The actual measured value will be displayed. Use
this
button to interrupt or continue the measuring as normal. Use this
button to
select the frequency filter as normal.
You must first switch off the ROLeak Aqua 3Plus if you want to start working with headphones
again. After you switch back on again, the device will run a normal search for the headphones
that were last used and establish the Bluetooth connection with them.
8
Accessories
You can find suitable accessories in the main catalog or at www.rothenberger.com
9
Customer service
The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using RO
online:
℡
+ 49 (0) 61 95/ 800 8200 + 49 (0) 61 95/ 800 7491
www.rothenberger.com
